SVS SB-2000 12" Sealed Box Subwoofer

Brand: SVS
Product Code: SVS-SB2000-SUB
Warranty: 5 Years
Colour: *

$1,650.00 $1,489.00
Qty:  
SVS
Truck
Free Shipping On Orders Over $75.00
Padlock
256-Bit SSL Secure Ordering System
Shield
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

SB-2000 Subwoofer

The SVS SB-2000 achieves a staggering 19-240 Hz frequency response from a compact, sealed enclosure weighing only 35 lbs. and measuring 14.2-inches all-around (without feet and grille). The subwoofer's weight, compact footprint and understated but elegant appearance make moving and blending it into any listening environment a cinch, without sacrificing any of the power and slam we expect from massive subwoofers. No small performer, the SB-2000 matches or beats the output levels of subwoofers twice its size and weight. An all-new driver and amplifier, sealed cabinet and revised tuning unleash the SB-2000 to achieve levels of articulation, musicality, dynamics and fathomless extension unequalled in other compact powered subwoofers.

Commanding 12 Inch SVS High Output Driver

At the heart of the SVS SB-2000 subwoofer is a newly engineered 12-inch 2000-series driver with dual high-grade ferrite magnets and an FEA-optimised motor for nearly distortion-free performance, even at the most extreme drive levels. A reinforced Nomex spider was integrated for improved linearity and driver control, especially important when the STA-500D amp is pushing the driver to reference SPL playback levels. To ensure the SB-2000 can play its best long into the future, the driver also features a durable low-creep rubber long-throw surround and integrated tinsel leads to maximise longevity.

Powerful and Sophisticated Sledge STA-500D Amplifier

The SB-2000 Subwoofer's Sledge STA-500D DSP amplifier boasts specs and features normally found in subwoofers costing two or three times as much. Conservatively rated at 500 watts RMS and 1,100+ watts peak dynamic power, the amp also has brains to match its brawn. A sophisticated DSP in the amplifier includes an array of filters and volume, gain, and phase controls for fine-tuning performance. The innovations don't stop there though. A frequency-dependent limiter/compressor algorithm with adjustable attack/release and compression parameters offers the ultimate in refined behaviour at the drive limits of the subwoofer system.


Frequency Response / Acoustic Data

  • 19-220 Hz +/- 3 dB
  • Expect 2-3 Hz deeper extension in small to mid-size rooms.
  • 2-meter ground plane away from reflective structures (quasi-anechoic)
  • Roll-off slope optimised to take maximum advantage of available room gain

Subwoofer Specs

  • Premium black ash and piano black finish options
  • Protective non-resonant steel mesh grille
  • Front-firing 12" driver
  • Rear-mounted amplifier
  • Screw-in rubber feet
  • Robust Medium Density Fibreboard (MDF) cabinet construction
  • Cabinet Dimensions: 14.6" (H) x 14.2" (W) x 15.4" (D) (without grille)
  • Overall Dimensions: 14.6" (H) x 14.2" (W) x 17.1" (D) (with grille)
  • Weight (unboxed): 34.8 pounds
  • Shipped Dimensions: 21" (H) x 20.2" (W) x 23.2" (D)
  • Shipped Weight: 51 pounds

Driver Specs

  • SVS 12" 2000-series driver
  • Powder-coated cast aluminium basket
  • Dual high-grade ferrite magnets
  • Finite Element Analysis (FEA)-optimized motor structure
  • Dual shorting rings reduce gap induction and lower distortion
  • Extended pole piece improves heat sink and thermal management properties
  • 2" diameter, high-power voice coil
  • Upgraded Nomex spider for improved linearity and driver control at extreme drive levels
  • High-quality insulated tinsel leads with 3-point-contact precision alignment
  • Lightweight aluminium cone with polypropylene dust cap provides excellent rigidity and pistonic behaviour
  • Low-creep rubber long-throw surround for excellent durability and longevity

Amplifier Specs

  • Sledge STA-500D DSP amplifier
  • 500 watts RMS continuous (1100 watts peak dynamic)
  • Efficient and cool-running Class D topology
  • DSP control for accurate response and refined behaviour under all operating conditions
  • Main power rocker switch
  • Auto-On / On toggle switch
  • 3-12V trigger with 1/8" (3.5 mm) TRS mini-jack input
  • Green standby mode with > 0.5 watts consumption
  • Stereo line-level RCA Input & Output connections
  • Input impedance – 47 kΩ (unbalanced line-level RCA)
  • Continuously variable volume/gain control
  • Continuously variable (0-180 degrees) phase control
  • Continuously variable (50-160 Hz) 12 dB/octave low pass filter frequency with disable/LFE setting
  • Fixed 80 Hz 12 dB/octave high pass filter on line level outputs
  • RoHS compliant, lead-free construction and world-wide safety certifications
  • Detachable power cord
Specifications
Amplifier 500 Watts RMS (1100 Watts Peak)
Driver 12"
Frequency Response 19-220 Hz ±3dB
Port Size N/A
Height 37.00cm
Width 36.00cm
Depth 43.43cmm
Weight 15.79kg
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good

Enter the code in the box below:

Captcha