Wireless Subwoofer Receiver
The WSR (Wireless Subwoofer Receiver) expansion module for the DALI SOUND HUB adds wireless connectivity to your active subwoofer for seamless integration into any DALI EQUI stereo or surround sound setup.
Step 1 - Plug In
Switch off the subwoofer before connecting the WSR. Use the supplied RCA Phono cable to connect the WSR to the LFE input of the subwoofer (if no LFE input, check manual).
Step 2 - Power On
Connect the WSR power supply to a mains socket, then connect it to the WSR – the WSR will switch on immediately. Switch on the subwoofer and turn the volume to around 25%, if possible.
Step 3 - Connect
Ensure your SOUND HUB (COMPACT) is ON. Press the LINK & CONNECT (L& C) button on its rear panel. Now do the same on the WSR. Finish by pressing the L&C button on the SOUND HUB.
Step 4 - Adjust & Enjoy
To enjoy the best possible results, we recommend setting the subwoofer volume and high-pass filter controls appropriately (as described in the SUB manual).
Turn Your Sub Wireless
Convert your active sub into a wireless EQUI-compatible subwoofer.
Truly immersive surround sound is best with a subwoofer. If you already have an active subwoofer, the DALI WSR (Wireless Subwoofer Receiver) is just the ticket to integrate it into a wireless EQUI surround system. Simply connect the sub-out jack to the subwoofer input and power the WSR from a USB-C power supply. Now your subwoofer is officially part of your active wireless surround system.
Specifications | |
Signal Sample Rate | 96 kHz |
Signal Resolution | 24 Bits |
Audio Input | Wireless Audio Interface |
Audio Output | Mono RCA Connector |
Audio Output Level | 2 V RMS |
Power Supply Input | USB Type C (5 V DC, 0.5 A) |
Service Port | USB Type A |
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good