Wireless High-Fidelity Audio Transmitter & Receiver Kit
Using state-of-the-art wireless technology, the JLINK™ TRX system delivers pure, high-fidelity sound throughout your home, invisibly and effortlessly.
By broadcasting at an ultra-high frequency of 2.4 GHz, the JLINK™ TRX lets you connect any two line-level audio devices together, without the use of RCA signal cables to connect in between. Now you can send crystal clear, stereo sound from a source unit to a receiver, preamp or powered loudspeakers, wirelessly, up to 100 feet away (30 meters) without needing to route or hide long expanses of signal cables. RCA-type input/output connectors are compatible with most audio equipment and a compact design makes it easy to hide the transmitter and receiver chassis out of sight. A JLINK™ port is also included on the receiver for direct connection with JLINK™ compatible JL Audio products.
Especially useful in system designs that include remote source applications, lengthy signal cable runs or demanding installations due to challenging architecture, the JLINK™ TRX system gives you the freedom to position a source unit or outlying amplifier/powered loudspeakers (subwoofer or full-range) almost anywhere you would like.
Key Features
- Outstanding fidelity in subwoofer and full-range applications
- Bit-perfect digital PCM stereo wireless technology (16 bit / 48 kHz)
- RCA-type input/output connectors are compatible with most audio equipment
- Up to 3 JLINK™ transmitters can be used concurrently (3 channels to choose from)
- Up to 4 JLINK™ receivers (sold separately) can be paired to each JLINK™ transmitter
- Receiver includes JLINK™ port for use with compatible JL Audio products
| System Specifications | |
| S/N Ratio | 80 dB @ 1 kHz, 500 mV |
| THD+N | 0.02% @ 1 kHz, 500 mV |
| Crosstalk | >75 dB @ 1 kHz, 500 mV |
| Frequency Response | 16 Hz – 22 kHz (+0, -1 dB) |
| Wireless Range | 30 Meters / 100 Feet (Typical) |
| Wireless Channels | 3 Available, Selectable via Switch |
| Latency | 14 mS |
| Operating Temperature | 0 to 40 °C / 32 to 104 °F |
| AC Power Adaptor | 1 A, 5 Volts DC |
| Transmitter Specifications | |
| Input Impedance | 25 kΩ |
| Outputs | Bit-Perfect PCM Stereo Digital via 2.4 GHz Wireless |
| Receivers Supported | Up to 4 |
| Bit Depth/Sample Rate | 16 Bit / 48 kHz |
| Power Requirements | 200 mA, 5 Volts (via AC Adaptor) |
| Height (H) | 28.5 mm / 1.12 in |
| Width (W) | 89 mm / 3.5 in |
| Depth (D) | 89 mm / 3.5 in |
| Inputs | Analogue, Left and Right RCA-Type |
| Receiver Specifications | |
| Inputs | Bit-Perfect PCM Stereo Digital via 2.4 GHz Wireless |
| Outputs | Analogue, Left & Right RCA-Type, Analogue via JLINK Port to Compatible Product |
| Output Impedance | 250 Ω |
| Full Scale Output Voltage | 1.2 V |
| Power Requirements | 100 mA, 5 Volts (via AC Adaptor or JLINK Port) |
| Height (H) | 28.5 mm / 1.12 in |
| Width (W) | 89 mm / 3.5 in |
| Depth (D) | 89 mm / 3.5 in |
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
