Canor AI 1.20 Integrated Solid-State Amplifier
Canor AI 1.20 is an integrated solid-state amplifier in pure class-A up to 50 W per channel with a relay attenuator with two standalone blocks for each channel.
Highlights
- Operates in a pure class A
- 264,000 uF of total filtering capacitance
- Possibility to create a monoblock connection of 2 units
Main Features
Heat Disposal
We used a special copper plate for heat dissipation, which is installed on the heatsink and the power transistors are installed directly on the given copper plate.
Dual-Mono Connection
Dual-mono connection - each channel has its own power transformer. Power transformers are located in separate parts of the device.
Amplifier Design
A shielded tunnel passes through the centre of the AI 1.20 amplifier, in which filters with nanocrystalline coils are located. In addition, the input circuits are equipped with low-noise J-P transistors.
Monoblock Connection
For even better performance and sound, it is possible to connect AI 1.20 as monoblocks using a data cable. One unit becomes the "master" unit and the other the "slave". This is the so-called bridge connection of two amplifiers (a fully symmetrical connection).
Product Features
- An integrated solid-state amplifier in pure class-A up to 50 W per channel
- A relay attenuator with two standalone blocks for each channel
- PCB’s utilize our premium CMT™ technology (Canor® PCB Milling Technology), it is the way we mill printed circuit boards
- CMT™ technology originated in a long-standing endeavour to improve the sonic performance of our products
- Power supply units with filtered out interfering signals from the mains supply
- Interference-rejection and as small as possible leakage field ensure custom-wound toroidal transformers
- 264 000 uF of filtering capacitance simulates a nearly stabilized supply voltage
- An option of synchronous control enables the use of two amplifiers in a monoblock mode without the need of using an extra preamplifier and that is a Master/Slave mode with an output power of 100W per channel
| Specifications | |
| Stereo Output Power | 2 x 50 W / 4 Ω, 2 x 30 W / 8 Ω |
| Monoblock Output Power | 1 x 130 W / 4 Ω, 1 x 100 W / 8 Ω |
| Gain | 30 dB |
| Frequency Range | 20 – 25,000 Hz -0,5 dB / 5 W |
| Input Impedance | 30 kΩ |
| Inputs | 5 x RCA, 2 x XLR (XLR Active Only in Monoblock Connection) |
| Total Harmonic Distortion | <0.0009% / 1 kHz, 5 W |
| Signal-to-Noise Ratio | >90 dB |
| Signal-to-Noise Ratio Monoblock | >100 dB |
| Filtration Capacity | 132,000 uF / 35 V (Per Channel) |
| Damping Factor at 4 Ω Load at the Output | 250 (Based on Measured Output Impedance) |
| Damping Factor at 8 Ω Load at the Output | 500 (Based on Measured Output Impedance) |
| Power | 230 V / 50 Hz / 375 VA |
| Dimensions (W x H x D) | 435 x 170 x 485 mm |
| Weight | 28 kg |
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
