Revel Concerta C10 On Wall Centre Speaker (Single)

Brand: Revel
Product Code: REV-C10BK
Warranty: 5 Years
$849.00
Qty:  
Revel
Truck
Free Shipping On Orders Over $75.00
Padlock
256-Bit SSL Secure Ordering System
Shield
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

C10 Concerta Series 2 1/2 Way On Wall Loudspeaker

The performance of Revel Concerta™ on-wall loudspeakers has been extensively evaluated in a variety of on-and near-wall installations through blind listening tests in the Revel Multichannel Listening Lab.

Using proprietary 36-point anechoic measurements, Concerta on-wall speakers have been shown to deliver remarkably flat frequency response across an exceptionally wide listening area for clean, accurate sound in real-world listening rooms.

None of the competing systems tested under identical conditions performed as well. Remarkably, Revel engineers could not identify a single competing on-wall system they considered suitable for on-wall use, based on either laboratory measurements or double-blind listening tests.

With advanced drivers utilizing Micro Ceramic Composite (MCC) cones and domes, along with high-order crossovers, and housed in rigid aluminium enclosures styled to complement the look of LCD and plasma displays, Concerta on-wall systems will fill any room with brilliant, distortion-free sound from virtually any amplifier.

Concerta speakers are voice-matched for use in any combination to build movie and music systems of uncommon realism. The series includes an innovative 3-channel LCR system mounted in a single enclosure, a highly capable centre channel speaker, a choice of satellites and an impressive 250-watt powered subwoofer. The B120 sub can be connected directly to your system or operated wirelessly with an optional transmitter, for complete placement freedom.

All Concerta on-wall woofer, midrange and tweeter diaphragms are constructed of Micro Ceramic Composite (MCC), a new material created by anodizing both sides of an aluminium core. Anodizing both sides of an aluminium core adds strength and stiffness – but very little weight – to a material already well suited for use in transducer diaphragms.

With appropriate hardware, it’s possible to affix virtually any compact loudspeaker to a listening room wall, and manufacturers are free to promote any model of a certain size and weight as “wall-mountable.” But very few audio manufacturers have the facilities and expertise needed to determine just how their on-wall systems will sound when actually placed on or near a wall.


Key Features

  • Rigid aluminium enclosure
  • Micro Ceramic Composite (MCC) Cone Woofers
  • 1" Tweeter
  • Wall brackets
Specifications
Frequency Response (±3 dB) 110 Hz – 21 kHz
Height 4-1/4" (107 mm)
Width 22-15/16" (582 mm)
Depth 4-1/2" (113 mm)
Weight 6.75 lb (3.1 kg)
Crossover Frequencies 2–1/2-Way High-Order at 400 Hz and 2.2 kHz
Finishes Piano Black
High Frequency Driver Components 1" (25 mm) Tweeter with Waveguide and Micro Ceramic Composite (MCC) Dome
Nominal Impedance 8 Ohms
Low Frequency Extension –3 dB @ 110 Hz, –6 dB @ 100 Hz, –10 dB @ 80 Hz
Low Frequency Driver Components Dual 3" (76 mm) Woofers with Micro Ceramic Composite (MCC) Cones
Mid-frequency Driver Components Dual 3" (76 mm) Midrange Transducers with Micro Ceramic Composite (MCC) Cones
Sensitivity (2.83 V @ 1 m, 2π Anechoic) 89 dB
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good

Enter the code in the box below:

Captcha