Pro2 Inline Phono Stereo Preamplifier

Brand: Pro2
Product Code: PA005
Warranty: 12 Months
$29.95 $24.95
Free Shipping On Orders Over $75.00
256-Bit SSL Secure Ordering System
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

Pocket Sized Turntable Preamp!

Unlike line level audio sources you connect to a stereo (DVD/CD players, tape decks, TV audio, minidisc, etc.), the output from a magnetic cartridge installed in a good quality turntable is much lower, and requires an additional stage of amplification to bring it up to the same volume as the other sources you listen to through your stereo.

This additional amp stage, the phono preamp, is built in to most older receivers and amps, allowing direct connection of a turntable. However, newer stereo equipment, including virtually all mini systems and home theatre units, as well as many stereo receivers and amps, do not have a phono input. This is because records and turntables are supposedly obsolete in today's world dominated by CDs and DVDs.

In order to utilise the inputs that such units have (aux, tape, line, video and CD, etc.) to connect a turntable, you need to first pass the signal through an external phono preamp to raise the level. The same level increase is required if you're connecting a turntable to a computer sound cards line input, so you can make CD-Rs from LPs. Again, the external phono preamp provides this ability.

Key Features

  • Ultra compact design
  • Audio input: 1 x stereo RCA (L/R)
  • Audio output: 1 x stereo RCA (L/R)
  • Use either a 9V / 0.5A power supply (with a 3.5mm TS connector) or a 9V battery as a power source (sold separately)

Note: This unit does not come with a power supply. As noted above, this unit can be powered through a power adapter (recommended for fixed installations) or a 9V battery (more suitable for portable installations).

If you would like to use a power adapter for fixed installations, you will need to order both the 9V 0.5A power supply and 3.5mm TS connector tip. Both are listed below in our related products section.

Current Consumption 1mA (Average)
Estimated Running Time on 9V Battery 40 Hours Continuous Use (Based on 20mA)
Amplification 34dB
Input Impedance 50 kΩ
Output Impedance 50 kΩ
Frequency Range 30Hz ~ 20KHz
Compensation RIAA Correction
Dimensions (W x D x H) 86mm x 70mm x 28mm
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:

Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good

Enter the code in the box below: