HDMI Matrix Switch 4x4 (4 in 4 out) over Cat5e/Cat6 with Remote

HDMI Matrix Switch 4x4 (4 in 4 out) over Cat5e/Cat6 Overview

• HDMI Matrix Switch 4x4 (4 inputs & 4 outputs) over Cat5e/Cat6
• Each of the four source devices can be selected in any combination for the four outputs
• Suitable for Foxtel IQ/IQ2, PS3, Blu-ray Players and many other HDMI enabled devices
• 3D Compatible
• Compatible with HDMI v1.4 Video Formats
• Supports High Definition Video resolutions up to 1080p
• HDMI v1.3b & HDCP Compliant (High-bandwidth Digital Content Protection)
• Supports Audio Formats such as LPCM, Dolby TrueHD, DTS-HD Master Audio, Dolby Digital & DTS
• Deep Colour Support
• Each output supports transmission distance of up to 40m via 2 x Cat6 Cables (not included)
• Standard HDMI Cables can also be used in place of Cat5e/Cat6 Cables for each of the four outputs
• Can also be used with DVI (Adaptors required)
• IR pass through to enable control of each input device from each remote location
• Selectable inputs via the supplied IR Remote Controls (or can be switched manually)
• Can also be controlled via RS232
• LED Indicator to notify which device is in use

Note: The IR pass through feature does not support the Foxtel remote control. However, this unit will support audio & video distribution of the Foxtel IQ or IQ2 signal perfectly. The IR pass through feature will also support all other devices.

This HDMI Matrix 4x4 over Cat5e/Cat6 Is The Ultimate HDMI Distribution Solution!

This 4x4 (4 in 4 out) HDMI Matrix over Cat5e/Cat6 Ethernet offers extreme versatility and performance.

This device will accept up to four devices to be connected which can then be displayed in any combination to the four output displays. As this unit features the ability to use inexpensive Cat5e/Cat6 Cable instead of long HDMI Cables this offers a great opportunity to cut back on installation costs.

The four receiver units that connect to each of the remote displays also feature an IR receiver which not only allows the ability to select the desired device from the remote location, but each of the four inputs on the main control unit also feature IR emitters. This offers the convenience of having complete control for each source device from the remote location. This device can also be controlled via RS232.

This HDMI Matrix offers the highest bandwidth of 225 MHz which ensures a strong signal to provide perfect 1080p and 3D reproduction. Some of the lesser expensive products will only offer a low 165 MHz which means that the bandwidth is lower therefore increasing the risk of a poor signal.

This device is compatible with HDMI v1.4 video formats and also compatible with HDMI v1.3 or lower. As this device is completely HDCP compliant, the output signal will be duplicated from the selected input signal so that it is identical to the original (no signal strength loss).

Write a Review

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad            Good

Enter the code in the box below:

HDMI Matrix Switch 4x4 (4 in 4 out) over Cat5e/Cat6 Technical Specifications
HDMI Connector	Type A 19 Pin Female
Cat5e/Cat6 Connector	RJ45
Number of HDMI Inputs	4 (Four)
Number of HDMI Outputs	4 (Four)
Input DDC Signal	5 Volts p-p (TTL)
Control Port	RS-232 Female, Mini Stereo
Video Amplifier Bandwidth	225 MHz
Supported Resolutions	480i, 480p, 576i, 576p, 720p, 1080i & 1080p
3D Compatible	Yes
Product Dimensions For Main Unit (mm)	441x202x45
Product Dimensions For Receiver Units (mm)	155x70x25
Operating Temperature	0°C to 70°C
Operating Humidity	10% to 85% RH (No Condensation)
Storage Temperature	10°C to 80°C
Storage Humidity	5% to 90% RH (No Condensation)
Power Supply for Main Unit	5.5V DC, 4A, 20W
Power Supply for Receiver Units	5V DC, 2A, 5W

HDMI Matrix Switch 4x4 (4 in 4 out) over Cat5e/Cat6 Package Contents

• 1 x HDMI Matrix 4x4 (4 in 4 out) over Cat5e/Cat6 Main Control Unit
• 4 x Receiver Units (for each of the remote locations)
• 1 x IR Extender (to enable control of the main unit when concealed)
• 4 x IR Emitters (enables full control of each source device from each remote location)
• 1 x Main Unit Remote Control (to select which source device to use)
• 4 x Receiver Unit Remote Controls (to select source device from each remote location)
• 5 x CR2025 Batteries for each Remote Control
• 1 x Australian 5.5 Volt Power Supply (For Main Unit)
• 4 x Australian 5 Volt Power Supplies (for Receiver Units)
• 1 x User Manual (English)