Revel PerformaBe C426Be Centre Speaker

Brand: Revel
Product Code: REV-C426BE
Warranty: 5 Years
Colour: *

$8,999.00
Qty:  
Revel
Truck
Free Shipping On Orders Over $99
Padlock
256-Bit SSL Secure Ordering System
Shield
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

C426Be 3-Way Quadruple 6.5" Centre Channel Loudspeaker

The Revel C426Be joins our award-winning PerformaBe series as a high-performance centre channel loudspeaker for use in a multichannel home theatre environment. As part of the PerformaBe loudspeaker line, the C426Be includes a 1-inch (25mm) beryllium tweeter driven by massive 85mm dual ceramic magnets. The powerful tweeter and 5th-generation ceramic-coated, cast-aluminium Acoustic Lens waveguide seamlessly integrate with the directivity of the companion midrange driver resulting in greater efficiency, improved dynamic range, reduced distortion, and increased power handling compared to aluminium or titanium tweeters.

Beryllium - Element 4 on the Periodic Table - is a rare earth metal that is renowned for its remarkable physical properties that make it the ideal material for a high-frequency transducer. Compared to aluminium and titanium tweeter diaphragms, Beryllium offers 4.5 times the stiffness and three times more damping, and does so at only half of the weight. Beryllium tweeters are the centrepiece of the Revel PerformaBe loudspeaker series.

The 5.25-inch (130mm) midrange and quadruple 6.5-inch (165mm) aluminium cone woofers utilise Deep Ceramic Composite (DCC) cones for improved performance. DCC is a plasma electrolytic oxidation process that uses a plasma discharge to create a coarse ceramic coating on both sides of the aluminium core. The deep ceramic layers sandwiching the aluminium core provide constrained layer damping that push cone breakup modes outside of the passband allowing the driver to maintain ideal pistonic motion throughout its range. DCC cones combine with optimised motor magnetics to deliver improved mid- and low-frequency performance.

PerformaBe crossover networks utilise all film capacitors and air core inductors in the midrange and tweeter circuits. These premium components allow Revel's world-class engineers to extract nuances and details from music that would otherwise be lost. Combined with traditional Revel high-order crossover slopes and proprietary Acoustic Lens waveguide geometry, transducer integration is seamless.

C426Be side panels are painted in stylish metallic black. The loudspeakers are available in a choice of four high-gloss finishes for seamless integration into any décor: Black, White, Walnut, and Metallic Silver.


Key Features

  • 1-inch Beryllium dome tweeter
  • 5th-generation acoustic lens waveguide
  • Deep Ceramic Composite (DCC) cone midrange and woofers
  • High-order crossovers with film capacitors and air core inductors
  • Magnetically attached grilles
  • 4 premium high-gloss finishes available
Specifications
Type 3-Way Quadruple 6.5" Centre Channel Loudspeaker
High-Frequency Transducer 1" (25 mm) Beryllium Dome with Acoustic Lens Waveguide
Midrange Transducer 5.25" (130 mm) Deep Ceramic Composite (DCC) Aluminium Cone with Cast Frame
Low-Frequency Transducer Four 6.5" (165mm) Deep Ceramic Composite (DCC) Aluminium Cones with Cast Frames
Enclosure Type Bass-Reflex via 2 Rear-Mounted Ports
Recommended Amplifier Power 50 – 300 Watts RMS
Frequency Response (-6 dB) 38 Hz - 40 kHz
Low-Frequency Extension 38 Hz (-10 dB), 38 Hz (-6 dB), 41 Hz (- 3dB)
Sensitivity (2.83 V / 1 m) 90 dB
Nominal Impedance 8 Ohms
Crossover Frequencies 210 Hz, 2,100 Hz
Inputs Dual Gold-Plated Binding Posts with Shorting Straps
Dimensions with Base and Grille (H x W x D) 263 x 979.7 x 358 mm (10.4" x 38.6" x 14")
Weight 27.7 kg (61 lb)
Available High-Gloss Finishes Black, White, Metallic Silver, and Walnut
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good