Platinum In-Wall 3G
The Platinum In-Wall 3G is a three-way architectural In-Wall loudspeaker that features an MPD III tweeter, 4” RDT III midrange driver and twin 6" RDT III bass drivers. It can be used either horizontally or vertically anywhere within a high-performance home theatre or two-channel stereo system.
Platinum In-Wall 3G is Monitor Audio’s flagship high-performance, architectural, in-wall speaker. It is designed for use in high-end audio and movie systems, where accurate, clear and lifelike sound is required. With the minimum of room intrusion but with maximum scale and sonic impact.
Platinum In-Wall 3G can be installed either vertically or horizontally, which means it can be used on any channel within a system and is ideal for LCR applications and for seamless tonal accuracy within a theatre system.
Key Features
- 1 x MPD III high-frequency transducer for a larger, clearer, and more lifelike sound
- 1 x 4” RDT III mid-bass driver for incredible levels of clarity and scale
- 2 x 6” RDT III bass drivers for exceptional weight and depth
- Patented 'DCF' (Dynamic Coupling Filter) mechanism for more natural sound
- Bespoke speaker terminals and footings
- Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
- Rigid cabinet construction made from 25 mm MDF with steel back
- Extensive internal bracing using thick MDF cross bracing techniques
| Specifications | |
| System Format | 3 Way |
| Frequency Response, Free-Field (-6 dB) | 41 Hz – 60 kHz |
| Frequency Response, In-Room (-6 dB) | 27 Hz – 60 kHz |
| Sensitivity (2.83 Vrms @ 1 m, Free-Field) | 88 dB |
| Nominal Impedance | 4 Ohms |
| Minimum Impedance | 4.1 Ohms @ 1.6 kHz |
| Continuous Power Handling (RMS into 4 Ohms, Pink Noise with 6 dB Crest Factor) | 300 W |
| Recommended Amplifier Power (RMS into 4 Ohm, Music Signal) | 150 – 600 W |
| Bass Alignment | Sealed |
| Port Tuning Frequency | N/A |
| Crossover Frequency | LF/MF: 825 Hz, MF/HF: 3 kHz |
| Drive Unit Complement | 2 x 6” RDT III Bass Driver, 1 x 4” RDT III Mid-Range Driver, 1 x MPD III Tweeter |
| External Dimensions (Including Grille and Terminals (H x W x D)) | 1207 x 332 x 105.5 mm (47 9/16 x 13 1/16 x 4 4/16”) |
| Cut-Out Dimensions | 1175 x 300 x 97.5 mm (46 1/4 x 11 13/16 x 3 13/16”) |
| Weight | 27.7 kg (61 lb) |
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
