Monitor Audio Creator Series C3L-A Fixed Angle In Ceiling Speaker (Single)

Brand: Monitor Audio
Product Code: MON-C3LA-IC-SPK
Warranty: Lifetime
$1,599.00
Qty:  
Monitor Audio
Truck
Free Shipping On Orders Over $99
Padlock
256-Bit SSL Secure Ordering System
Shield
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

C3L-A

This large Tier 3 in-ceiling loudspeaker is a three-way model with an angled IDC II driver array that focuses sound mid-range and high-frequency sound into the listening area for improved clarity. It has a cut-out dimension of 248 mm and revolutionary patented Quik-Link speaker cable connector and Tri-Grip II for quick, simple, reliable and strong installation.

C3L-A is a new and invaluable addition to the Creator Series. ‘A’ stands for ‘Angle’, and the speaker consists of a fixed-angle IDC II that delivers a ‘spotlight’ effect that focusses and directs the mid-range and high-frequency sound into the listening area for improved intelligibility and clarity.

The completely redesigned IDC II is set at 25 degrees and delivers focused sound across the full frequency range into the listening area, making it an ideal in-ceiling LCR speaker – where In-wall speakers aren’t possible.

Supported with the lightweight, pistonic RDT III cone and an extensive motor system to drive it, the soundstage and dynamic range is highly impressive. C3L-A is ideal for creating a discreet home theatre and multi-channel music solution that offers high-fidelity performance, detail, clarity and deep, controlled bass.

It has a cut-out diameter of 248 mm and uses the patented Quik-Link speaker cable connecter, which revolutionises the ease and speed of speaker installation. Tri-Grip has also been evolved for simple, reliable and strong fitment.

Optional square grille can be used with this model.


Key Features

  • Ideal for installations where high-performance acoustics are desired
  • Angled IDC II projects sound into the room for pin-point accuracy
  • Three-way design
  • Mid-frequency ‘mid-pod array’
  • 1 x 1" (25 mm) IDC II tweeter with UD Waveguide II for lifelike sound
  • 1 x 9" (229 mm) RDT III bass driver
  • 1 x 4" (102 mm) IDC II mid-range driver
  • Patented Quik-Link speaker cable connector for quicker installation
  • Tri-Grip II for easy and secure fitment

Monitor Audio Creator Series C3L-A In Ceiling Speaker
Specifications
System Format 3-Way
Channels 1
Frequency Response, Installed (-6 dB) 45 Hz – 35 kHz​
Nominal Impedance 6 Ohm
Minimum Impedance (20 Hz – 20 kHz) 4.6 Ohm @ 2 kHz
Sensitivity (2.83 Vrms @ 1 m, Installed) 89 dB
Maximum Peak SPL (Single Speaker @ 1 m Z-Weighted) 119 dB
Continuous Power Handling (RMS into Nominal Impedance, Pink Noise with 6 dB Crest Factor) 150 W
Recommended Amplifier Power (RMS into 8 Ohm, Music Signal) 60 – 225 W
Drive Unit Complement 1 x 9" (229 mm) RDT III Bass Driver, 1 x 4" (102 mm) IDC II Midrange Driver, 1 x 1" (25 mm) IDC II Tweeter
Crossover Frequency LF/MF: 700 Hz, MF/HF: 3 kHz
Mounting Depth 157 mm (6 3/16")
Cut-Out Hole Diameter 248 mm (9 3/4")
External Dimensions (Including Grille (H x W x D)) 278 x 278 x 161​ mm (10 15/16" x 10 15/16" x 6 5/16")
Weight (Each) 5.1 kg (11 lb 3 oz)
Pre-Construction Bracket CL-B
Cabinet Finish Matte Black, Orange & Green​
Sold As Single Unit
Corner Switch On/Off
HF Switch -/0/+
MF Switch -/0/+
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good