Cadenza Mono
Find your old records as well as new micro groove mono records and experience the Cadenza Mono!
The Cadenza Mono model is made with a Nude Fine Line stylus and a cylindrical aluminium cantilever. The stylus radius is r/R 8/40 µm.
The coils are made from 6NX (99.9999%) pure silver wire. An improved winding process on the armature allows a better channel balance.
For easy use the pins are connected so you get the same signal from both pairs of connecting pins.
Sharing internal build with the Cadenza Red and with optimised adjustments for mono playback the sound is relaxed, homogeneous and moderate.
| Cadenza Mono Technical Data | |
| Output Voltage at 1 kHz, 5 cm/sec. | 0.45 mV |
| Frequency Response | 20 Hz - 20 kHz +3 dB / -1 dB |
| Tracking Ability at 315 Hz at Recommended Tracking Force | 70 µm |
| Compliance, Dynamic, Lateral | 12 µm/mN |
| Stylus Type | Nude Fine Line on Alu Cantilever |
| Stylus Tip Radius | r/R 8/40 µm |
| Tracking Force Range | 2.2-2.7 g (20-25 mN) |
| Tracking Force Recommended | 2.5 g (25 mN) |
| Tracking Angle | 20° |
| Internal Impedance, DC Resistance | 5 Ohm |
| Recommended Load Impedance | 50-500 Ohm |
| Cartridge Body Material | Stainless Steel / Aluminium |
| Coil Wire Material | 6NX (99.9999%) Pure Silver Wire |
| Cartridge Colour | Natural/Black |
| Cartridge Weight | 10.7 g |
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
