Monitor Audio Bronze W10 - 10" Subwoofer

Brand: Monitor Audio
Product Code: MON-BW10-6G-SUB
Warranty: 5 Years
Colour: *

$1,469.00 $1,322.00
Qty:  
Monitor Audio
Truck
Free Shipping On Orders Over $100
Padlock
256-Bit SSL Secure Ordering System
Shield
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

Bronze W10

If you love deep and refined bass notes, the Bronze W10 is a must-have addition to your speaker set-up as every soundscape is effortlessly reinforced by our beautifully designed subwoofer.

The Bronze W10’s long-throw 10" C-CAM subwoofer driver combines with the 10" auxiliary bass radiator to bring a vivid realism to any performance.

Our engineers have acoustically improved the driver and bass radiator by reducing the moving masses and tuning the compliances in the system to improve the transient response - kick drumsand explosions now have much more punch and precision. Reduced moving mass and improved rubber feet allows more energy to be transmitted directly into the room rather than being lost through mechanical vibrations through the floor and walls.

The Bronze W10 is a stunning addition to any room.

Monitor Audio Bronze W10

Key Features

  • Long-throw 10" (250 mm) driver featuring ‘dished’ C-CAM
  • 10" (250 mm) flat panel Auxiliary Bass Radiator (ABR) positioned underneath the unit
  • Class D amplifier with high current Switch Mode Power Supply (SMPSU)
Monitor Audio Bronze W10
Specifications
System Format Long-Throw 10" Driver Featuring ‘Dished’ C-CAM Cone. 10" Flat Panel ABR (Auxiliary Bass Radiator). 18 mm M.D.F. Internally Braced Construction
Lower Frequency Limit 34 Hz (-6 dB)
Upper Frequency Limit 50 – 120 Hz with 24 dB/Octave
Drive Unit Complement 1 x 250 mm (10") C-CAM Subwoofer Driver Featuring a 2" Long Throw Voice Coil
Linear Driver Excursion 17 mm Peak to Peak
Amplifier Output 220 W
Amplifier Classification Class D with High Current Switch Mode Power Supply (SMPSU)
Phase Control 0 Degrees & 180 Degree Pure Invert
Low Pass Filter Alignment 2nd Order (12 dB/Octave), From 40 Hz to 120 Hz
Equalisation DSP 3 Pre-Set Modes: Music, Movie, Impact
Auto Sensing Line Level >3 mV. Auto Standby Feature After 20 Minutes
Audio Input/Outputs LFE Unbalanced Input RCA, Stereo Unbalanced Inputs RCA
Input Impedance 20 kOhms Input Impedance
12 V Trigger 3.5 mm Mono Mini-Jack. 6 V Threshold
Electrical Certifications CE / CB / ETL / FCC / CCC / ErP (Energy Saving Compliant)
Mains Input Voltage 100 – 120 VAC 50 – 60 Hz / 220 – 240 VAC 50 – 60 Hz (Manually Selected)
Power Consumption Maximum 300 W, Standby <0.5 W (ErP Compliance)
Fuse Type 20 mm T4AL 250 VAC
External Dimensions (Including Amp, Drivers and Terminals (H x W x D)) 321 x 321 x 364 mm (12 5/8 x 12 5/8 x 14 5/16")
External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D)) 366.5 x 321 x 364 mm (14 7/16 x 12 5/8 x 14 5/16")
Weight (Unpacked) 13.4 kg (29 lb 9 oz)
Sold As Single Unit
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good