Pro-Ject MaiA S3 Integrated Amplifier

Brand: Pro-Ject
Product Code: PRO-MAIA-S3-AMP
Warranty: 2 Years
Colour: *

$1,099.00 $989.00
Qty:  
Pro-Ject
Truck
Free Shipping On Orders Over $100
Padlock
256-Bit SSL Secure Ordering System
Shield
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

MaiA S3

Compact stereo amplifier with timeless design & future-proof technology!

The MaiA S3 continues Pro-Ject's tradition of building versatile amplifiers with a smaller footprint. Ready for digital or analogue sources, wired or wireless – you’re covered, and the MaiA S3 is also at the ready for MM cartridges. You can hook up your tuner or any other analogue device to one of the three line-level RCA inputs, whilst the DAC section allows one coaxial and two optical connections. Moving to wireless connections, the high definition aptX™ HD Bluetooth 5.0 input allows you to stream your favourite music via smartphone. The newly-designed casework goes even further in blocking electromagnetic interference than in previous models and perfectly matches other Pro-Ject S3 components.


Despite its Size, Eight Source Devices Can be Connected Simultaneously:

  • High-quality phono MM + high output MC preamp
  • T3 analogue line level inputs
  • Digital coax input (up to 24 bit/192 kHz)
  • 2 Toslink (optical) inputs (up to 24 bit/96 kHz)
  • Wireless Bluetooth streaming (5.0 aptX HD) input with dedicated antenna
Specifications
Power Output 2 x 23 W at 8 Ω / 40 W at 4 Ω (1% THD)
Frequency Response (20 Hz - 20 kHz) <-0.5 dB @ 4 Ω
Channel Separation -69 dB at 10 kHz
Signal to Noise Ratio 97 dB (101 dB, A Weighted) @ 4 Ω
THD <0.04% at 10 W / 4 Ω
Headphone Amplifier 2 x 75 mW at 32 Ω (1% THD)
Headphone Output 6.3 mm Jack (16 – 600 Ω)
Analogue Inputs 3 x Pair RCA, 1 x Phono MM (RCA)
Digital Inputs RCA Coax., 2 x Toslink, Bluetooth 5.0 (aptX)
D/A-Converter Cirrus Logic CS4344 24 Bit/192 kHz
Variable Output 1 x Pair RCA
Speaker Connectors 4 mm Ø Banana Plugs, Spade Connectors or Naked Wire
Power Supply 20 V/3 A DC; 100 - 240 V, 50/60 Hz
Standby Power Consumption <0.5 Watts
Dimensions (W x H x D) 206 x 55 x 153 (176 mm with Sockets)
Battery Remote Control 1 x CR2032 or CR2025 (3 V)
Weight 1070 g Without Power Supply
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good