Denon PMA-1700NE Integrated Amplifier

Brand: Denon
Product Code: DEN-PMA-1700NE
Warranty: 2 Years
Colour: *

$2,999.00
Qty:  
Denon
Truck
Free Shipping On Orders Over $99
Padlock
256-Bit SSL Secure Ordering System
Shield
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

Integrated Amplifier with 140W Power per Channel

With ultra-high current single push-pull circuit power and Advanced AL32 Processing, the Denon PMA-1700NE retains the detail of the original recording. Listen to your favourite music via the two digital inputs, a rear USB-B input, MM or MC phono equalizer—or go analogue with the included DAC mode.


Key Features

  • High-power 140W integrated amplifier
  • Advanced AL32 Processing Plus
  • USB-DAC supporting 11.2- MHz DSD and 384-kHz/32-bit PCM
  • MM and MC phono equalizer
  • High-precision electrical controls
  • Optical and coaxial digital inputs
  • External pre-amp input terminals
  • Six-block chassis configuration and direct mechanical ground construction
  • Build integrity with thoughtfully selected components

High-Power 140W Integrated Amplifier

Drive your loudspeakers with 140 Watts of power per-channel into 4 Ohms. This integrated amplifier offers compatibility with the widest range of speaker types and impedances for operational stability.

Denon PMA-1700NE Stereo Integrated Amplifier

Advanced AL32 Processing Plus

Advanced AL32 Processing Plus supports digital audio sources up to high resolution of 384-kHz/32-bit. The algorithms restore information that was lost during the digital recording to ensure detailed playback.

Denon PMA-1700NE Stereo Integrated Amplifier

USB-DAC

PMA-1700NE provides USB-DAC function that supports high resolution audio signals up to 11.2-MHz DSD and 384-kHz/32-bit PCM. These digital signals with suppressed jitter will get passed on to the high quality DAC for an optimal D/A conversion with highest precision.

Denon PMA-1700NE Stereo Integrated Amplifier

MM and MC Phono Equalizer

The PMA-1700NE includes a phono equalizer that supports input from both MM and MC cartridges. The simple, straightforward design significantly improves sound quality.

Denon PMA-1700NE Stereo Integrated Amplifier

High-Precision Electrical Controls

The PMA-1700NE embraces electrical volume, balance, and tone controls while preserving the analogue feeling of operation. The unique mechanism offers smooth, linear control. A Source Direct function passes by all tone control for purest audio.

Denon PMA-1700NE Stereo Integrated Amplifier

Optical and Coaxial Digital Inputs

The PMA-1700NE features two optical inputs and one coaxial input and supports PCM signals up to 192 kHz/24 bit.

Denon PMA-1700NE Stereo Integrated Amplifier

External Pre-Amp Input Terminals

“EXT/PRE” input terminals are fixed gain inputs that can be used for connecting an external pre-amp using the PMA-1700NE as a power amp.

Denon PMA-1700NE Stereo Integrated Amplifier

Six-Block Chassis Configuration and Direct Mechanical Ground Construction

Constructed with 1mm-thick steel plates and damping feet made of ABS resin with rigid rib construction, the chassis protects the signal circuits from external vibration and eliminates adverse effects of mutual interference among the circuits.

Denon PMA-1700NE Stereo Integrated Amplifier

Build Integrity with Thoughtfully Selected Components

With a more than 110-year legacy of designing premium audio components, trust that your Denon product is built to last.

Denon PMA-1700NE Stereo Integrated Amplifier
Audio
Rated Output Power 70 W + 70 W (8 ohm, 20 Hz - 20 kHz, THD 0.07%), 140 W + 140 W (4 ohm, 1 kHz, THD 0.7%)
Total Harmonic Distortion 0.01% (Rated Output: –3 dB), 8 Ohm, 1 kHz
Input Sensitivity: Power Amp Input 0.85 V / 47 kohm (Ext. Pre)
Input Sensitivity: CD / Line / Recorder 125 mV / 19 kohm
Input Sensitivity: Phono Input MM: 2.5 mV / 47 kohm, MC: 200 μV / 100 ohm
Signal to Noise Ratio Phono (MM): 89 dB, Phono (MC): 74 dB, CD: 107 dB
Analogue Audio
Power Amplifier Circuit New UHC-MOS, Single Push Pull (7)
Preamplifier Circuit Variable Gain Preamplifier (Op-Amp)
Bass / Treble / Mid / Balance Control ✓ / ✓ / - / ✓
Source Direct
Analogue Amp Mode ✓ (Button on Front Panel)
DAC Circuit PCM1795
Digital Audio
Digital Processing Advanced AL32 Processing Plus
DAC Master Clock Design
Asyncronous Mode (For USB-B Input)
Inputs / Outputs
Phono Input ✓ (MM / MC) (Default = MM)
Analogue Input (Including Phono) / Rec Out (RCA) 4 / 1 (Phono / CD / Network, Aux / Recorder)
Optical Input / Output (Maximum Support) 2 / 0 (192 kHz / 24 bit)
Headphone Output 1 (Turns Off the Speaker Automatically when Headphone is Inserted)
Coaxial Input / Output (Maximum Support) 1 / 0 (192 kHz / 24 bit)
Speaker Terminal Gold Plated
Control
Remote Control (RC-1249 Remote Control Bus Terminal)
Network
Wi-Fi -
HEOS -
USB-B
USB B (USB DAC) 1 (Rear)
PCM Sample Rate 384 kHz / 32 bit
DSD Audio Streaming (DoP) 11.2 MHz
General
Available Colours: Black / Premium Silver ✓ / ✓
Metal Front Panel ✓ (Aluminium)
Power Consumption 295 W
Standby Consumption 0.2 W TV Autoplay Off, 0.4 W TV Autoplay On
Auto Power Off
Detachable Power Cable
Remote Control
System Remote Function
Unit Dimensions (W x D x H) 434 x 410 x 135 mm
Weight 17.6 kg
Carton Dimensions (W x D x H) 548 x 520 x 249 mm
Carton Weight 20.4 kg
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good


Newsletter
Subscribe to our newsletter for exclusive offers, event information, news and more.

Email: *

First Name: (Optional)

Last Name: (Optional)