Swans VR Series
The VR Line features 3 dB attenuation for woofers and tweeters. Switches are located on the front baffle of all speakers, and allow the installer or end-user to fine tune speaker output levels to match room designs, specific applications or individual listening preferences.
The 4 ohm, 8 ohm jumper located on the PCB provides the installer increased flexibility in matching power output and impedance levels to optimise a systems performance.
Nomex "Stratum" Cones
The VR Series uses a layered Nomex "Stratum" cones for smooth and responsive lower end frequencies. The "Stratum" cone is layered with honeycomb shaped Nomex fibres between tightly woven fibreglass. This structure provides stiffness, strength and durability. This composite cone lets the woofer section play more defined bass, and produces a refined midrange to bring a cleaner, clearer warmer listening experience.
Infused Silk Tweeters
The silk tweeters are infused with bonding resins which add strength and moisture resistance while allowing for smoother frequency response output for the tweeter. The VR Series tweeters are able to handle more power and image more consistently than most soft dome tweeters. Tweeters allow for a 30-degree tilt with full rotation swivel, allowing tailored and optimised performance to match any room design.
Skillfully Engineered Crossovers
Each speaker features crossovers that blend the sound spectrum seamlessly with skillfully engineered 6, 12, 18 and 24 db networks. The tweeters midranges also feature polyamide auto reset switch technology for high power protection. This will insure that that the tweeters and are never damaged in case of overpower.
All speakers are designed for excellent performance in a full range of indoor listening environments with PP Plastics, large wire gauges for better transfer of signal, stainless steel hardware and rust-roof aluminum grilles. This will ensure many years of listening enjoyment.
- 6.5" 2 way in wall speaker
- Tweeter: Swivel 30 degrees, 1" silk dome, ferro-fluid cooled, neodymium magnet, wide dispersion
- Woofer: 6.5" Nomex "Stratum" cone, rubber surround, 18.5 oz magnet, 1" voice coil, bumped back plate, vented pole piece
- Crossover: Phonalic PCB board, 12 dB woofer section, 18 dB tweeter section, polyamide auto protective switch for tweeter
- Frequency response: 45 Hz - 20 KHz
- Sensitivity: 86 dB
- Recommended amplifier power: 10 - 100 watts
- Impedance: 8 ohm
- Cut out size: 276 mm X 189 mm
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.Your Name:
Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
Enter the code in the box below: