TAD 12AY7/6072A
Vintage tone for original vintage Fender tweed amps. The original tube for all those Fender® tweed amps from the 50s. Brings back the original sound to your tweed amp. The 6072A is also used in high quality tube microphone circuits
TAD Premium Selection
Q: When does a preamp tube become a Premium Selected tube?
A: All preamp tubes labelled Premium Selected have passed the following tests:
- Low Noise Test
- Microphonic Test
- Gain Test
- Sonic Test
- Shock Test
- Listening Test
- Balanced Output Test
| Electrical Characteristics | |
| Heater Voltage (AC or DC) | Series: 12.6 V +/-1.0 V, Parallel: 6.3 V +/- 0.5 V |
| Heater Current | Series: 0.15 A, Parallel: 0.30 A |
| Heating | Indirect |
| Cathode-to-Heater Potential, Max. | 100 V |
| Direct Interelectrode Capacitance, Max.* | Grid to Plate: 1.4 pF / Grid to Cathode: 1.3 pF / Grid to Heater: 1.3 pF / Plate to Cathode: 0.7 pF |
* Without external shielding, nominal values.
| Mechanical | |
| Operating Position | Any |
| Base | E9-1, Small Button 9-Pin |
| Dimensions - Height | 56 mm |
| Dimensions - Seated Height | 49 mm |
| Dimensions - Diameter | 22.8 mm |
| Cooling | Conventional |
| Approximate Net Weight | 13 g |
| AF Power Amplifier Maximum Ratings | |
| DC Plate Voltage | 300 V |
| Positive DC Grid Voltage | 0 V |
| Negative DC Grid Voltage | -50 V |
| Plate Dissipation | 1.5 W |
| Bulb Temperature (Surface Hottest Point) | 180° C |
| Cathode Current | 10 mA |
There are currently no reviews available for this product. Be the first to write a review!
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
