Cadenza Bronze
Cadenza Bronze is a true high-end reference cartridge, conveying music with supreme precision, impact and dynamics.
The Cadenza Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever.
The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire.
Field Stabilizing Element/FSE, is used for optimal linearity especially during complex crescendo passages.
Cadenza Bronze stereo imaging capabilities illuminate the farthest corners of the soundstage in all three dimensions.
| Cadenza Bronze Technical Data | |
| Output Voltage at 1 kHz, 5 cm/sec. | 0.4 mV |
| Channel Balance at 1 kHz | <1 dB |
| Channel Separation at 1 kHz | >24 dB |
| Channel Separation at 15 kHz | >20 dB |
| Frequency Response | 20 Hz - 20 kHz +/-1.5 dB |
| Tracking Ability at 315 Hz at Recommended Tracking Force | 80 µm |
| Compliance, Dynamic, Lateral | 12 µm/mN |
| Stylus Type | Nude Ortofon Replicant 100 on Conical Alu Cantilever |
| Stylus Tip Radius | r/R 5/100 µm |
| Tracking Force Range | 2.2-2.7 g (22-27 mN) |
| Tracking Force Recommended | 2.5 g (25 mN) |
| Tracking Angle | 23° |
| Internal Impedance, DC Resistance | 5 Ohm |
| Recommended Load Impedance | 50-200 Ohm |
| Cartridge Body Material | Stainless Steel / Aluminium |
| Coil Wire Material | Ortofon Aucurum Wire (Gold Plated 6NX Copper Wire) |
| Cartridge Colour | Bronze/Black |
| Cartridge Weight | 10.7 g |
There are currently no reviews available for this product. Be the first to write a review!
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
