Monitor Audio CW10 - 10" Custom Subwoofer

Brand: Monitor Audio
Product Code: MON-CW10-SUB-BLK
Warranty: 5 Years
$2,199.00 $1,979.00
Monitor Audio
Free Shipping On Orders Over $99
256-Bit SSL Secure Ordering System
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories


The new CW10 places all the power in the hands of installer and client. Engineered for control in operation, bass quality and concealment in-room, the compact CW10 cube will add explosive bass frequencies to music and AV systems when tucked behind furniture on room boundaries.

Each little bass-engine is generously specified with custom installation in mind, providing versatile input and control options including RS232 and a dedicated ‘SubConnect’ PC applet via a wired USB interface.

The compact rigid 18 mm MDF cubic cabinets with regular 30 cm dimensions incorporate no fewer than three robust, similarly sized 10" C-CAM drivers. Each system array comprises an active high-excursion drive unit powered and trimmed by potent DSP-tuned amplification, together with twin side-mounted ABRs (Auxiliary Bass Radiators).

Key Features

  • Ultra-compact ‘cube’ shape designs
  • Twin side-mounted ABRs for increased output and reduced distortion. Higher output than a sealed box and better control and zero air noise compared to a ported box
  • High excursion woofers featuring signature C-CAM cone technology
  • High-power Class-D amplifier delivering 400 watts
  • DSP processing –all functions performed in the digital domain for precise control
  • RS-232 for integration with system controllers
  • SubConnect’ PC Applet for full feature adjustment, installer set-up and firmware update using USB
  • LFE Balanced XLR and unbalanced RCA Inputs
  • Stereo RCA line level inputs
  • Phase switch (0-180 degrees)
  • 12 V trigger and auto signal sensing with timer control
  • 4 x pre-set equalisation optimised for music, movie, flat and impact with customisation through ‘SubConnect’ Applet
  • Robust metal mesh grille on front woofer
  • Rigid MDF cabinet construction with durable vinyl finish
Monitor Audio CW10
System Format Active Subwoofer System – Twin ABR. 18 mm MDF Cabinet (CARB2 Approved)
Lower Frequency Limit 32 Hz (-6 dB)
Amplifier Output 400 W RMS @ <1% THD+N
Maximum SPL 105.8 dBA
Amplifier Classification Class D Amplifier with Switch Mode Power Supply (SMPSU)
Inputs Stereo RCA LFE (RCA) LFE Balanced (XLR)
EQ Flat / Music / Movie / Impact
Phase Control 0 & 180°
Auto Sensing LFE Input <2 mV Auto Wireless Audio Input Signal Detection
Auto Standby After Approximately 15 Minutes if no Signal Sensed Wireless Audio Source Turned Off
Drive Unit Complement 1 x 10" (250 mm) C-CAM Long Throw Driver, 2 x 10" (250 mm) ABR
Input Impedance >20 K ohms
Mains Input Voltage 110 - 120 VAC / 220 - 240 VAC 50/60 Hz (Manual Switch Selection)
Dimensions (Including Feet (H x W x D)) 315 x 305 x 320 mm (12 3/8 x 12 x 12 5/8")
Trigger Input 5 - 12 V via 3.5mm Mono Mini-Jack Socket
Power Consumption Standby: <0.5 W (ErP Approved), Typical Idle: <10 W, Max Rated: 400 W
Weight (Unpacked) 12.64 kg (27 lb 12 oz)
Sold As Single Unit
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:

Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good