W3R Add-on Receiver for W3
The W3 Wireless Audio Adapter is a wireless adapter for all your devices and apps.
Note: A USA power supply is pictured for illustration purposes only. This product will be supplied with an Australian power adapter.
Convenience Expanded
Customise Your Wireless Setup
The W3R Add-on Receiver is an expansion kit for your W3 Wireless Audio Adapter. You can add up to 2 W3R add-on Receivers for a total of 3 zones. It connects wirelessly to your existing W3 setup, and can output great sounding audio to any product with mini-jack or RCA audio connectors. Add sound to an additional room, or even make your Audioengine S8 Powered Subwoofer wireless.
Key Features
- Advanced wireless
- USB audio input
- Analogue audio output
- Plug & play
- Compact size
| Specifications | |
| Output | Analogue mini-jack |
| ADC | CS5343 |
| Full scale output | 1.0 Vrms |
| Output impedance | 470 ohms |
| Power source | USB power adapter |
| Power requirements | 150 mA, 5 V |
| SNR | 95 dB |
| THD+N | 0.01% |
| Crosstalk | -65 dB |
| Frequency response | 20 Hz to 20 KHz, +/- .2 dB |
| Wireless range | >100 feet (30 m) |
| Latency | <20 ms |
| Receivers supported | Up to 3 |
| Product dimensions | 100 x 30 x 10 mm (L x W x H) |
| Shipping weight | 1 lb |
| Included accessories | Minijack cable (20"), minijack to RCA adapter (12"), USB power adapter |
| Operating temperature | 32 to 95 degrees F |
| Non-operating temperature | -4 to 113 degrees F |
| Relative humidity | 5% to 95% non-condensing |
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
Enter the code in the box below:
