Infrared IR Repeater Remote Control Extender Kit - Foxtel Compatible

Brand: Pro2
Product Code: PRT-PRO1183
Warranty: 12 Months
Free Shipping On Orders Over $100
256-Bit SSL Secure Ordering System
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

Conveniently Conceal and Control Multiple Source Devices!

This kit provides all the components neccessary to facilitate concealment of multiple source devices while still maintaining complete control. This could be to allow placement of each source device inside a cabinet, or this could be to route the IR signal from one room to another.

To accommodate for a wide range of installation requirements, the main connecting block of this unit features a compact yet sturdy design. The IR emitters and receivers also feature an intelligent compact design that will seamlessly blend into any system environment.

Key Features

  • 6 emitter output connections - Control up to 12 source devices
  • Compatible with all versions of Foxtel (iQ, iQ2, iQ3 and iQ4)
  • IR confirmation LED indicator
  • 3 conductor 1/8" receptacle for interfacing with various brands of IR receivers
  • Compact size connection block
  • CFL friendly IR receivers - Can be installed in areas with fluorescent lighting
  • Both IR receiver and IR emitters include self adhesive tape for secure mounting
  • Mountable connection block

Package Contents

  • 1 x Connection block
  • 1 x IR receiver with 3.5mm TRS connector - 3m cable length
  • 1 x Dual head IR emitter with 3.5mm TS connector - 3m cable length
  • 2 x Mounting screws for connection block
  • 1 x Australian 12V power supply
  • 1 x User manual

Note: This IR Repeater Kit includes 3m of cable length for the IR Receiver and IR Emitter providing 6m total length. If a longer distance is required, a 3.5mm Stereo Extension Cable can be used to extend the IR Receiver (refer to the related products section below).

Connection Diagram

IR Repeater Kit Connection Diagram

Wiring Diagram

IR Repeater Kit Connection Diagram
Connection Block Specifications
Power Supply 12V DC 0.5A
Dimensions (W x D x H) 82mm x 60mm x 27mm
IR Receiver Specifications
Connector Type 3.5mm Stereo TRS Mini Plug
Cable Length 3 Metres
Receive Frequency Range 34kHz to 60kHz
Transmit Frequency Range 38kHz to 56kHz
Range 12.2m (40ft) at 38kHz / 7.6m (25ft) at 56kHz
Power Supply 12V DC 30mA Max.
Dimensions (W x D x H) 45mm x 14mm x 13mm
IR Emitter Specifications
Emitter LED's 2 (Dual)
Connector Type 3.5mm Mono TS Mini Plug (Tip: Signal, Sleeve: Ground)
Cable Length 3 Metres
IR Wavelength 940nm
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:

Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good