Wireless HDMI Extender - Up to 200m - Additional Receiver

Product Code: LKV388A-RX
$259.00
Qty:  
Truck
Free Shipping On Orders Over $75.00
Padlock
256-Bit SSL Secure Ordering System
Shield
Australian Warranty On All Products
Store Categories

Wireless HDMI Extender with IR up to 200m Additional Receiver Overview

  • Additional Receiver for use with the 200m Wireless HDMI Extender Kit
  • 12 Month Australian Warranty

Package Contents

  • 1 x Wireless HDMI Extender Receiver (RX) Unit
  • 1 x IR Receiver
  • 1 x Australian 5V Power Supply
  • 1 x User Manual

Note: This is an additional receiver unit only and will not work without the sender unit (please see the related products section below).


Wireless HDMI Extender Additional Receiver Installation Notes

For optimum performance, it is recommended not to exceed a total of three receiver units (the initial sender and receiver kit plus two additional receiver units). While more than three receiver units may work successfully, reliable transmission cannot be guaranteed.

Please also note that with each additional receiver unit added, the maximum transmission distance from the sender to each receiver unit will be reduced. Please refer to the specifications tab for more details.

Wireless Technology
Standard IEEE 802.11a/n (300mbps)
Workign Frequency 5470~5725MHz ISM Band
Modulation Mode 802.11a/n: OFDM
Antenna Built-In Aerial; 5dbi Tone-Up
Equivalent Output Frequency +23dBm (@MCS0, 11n)
Receiving Sensitity -74dBm @ 65Mbps, -96dBM @ 1Mpbs
Wireless Verification SRRC (Radio Transmitting Equipment Certification)
Wireless Direction Angle Omnibearing
Transmission Speed 11n: 300/270/216/162/108/54Mbps
Software
Insecure Use of Crptography WEP, WPA-PSK, WPA2/CCMP (AES), TKIP
Security Mechanism IP/MAC, Address filtering, Hiding SSID
Networking Protocol TCP, UDP, ARP, ICMP, DHCP, HTTP, NTP
TDMA Increase Supported (TDMA Eliminates the Influence from Hidden Node to Increase One TX to Many RX Performance)
Automatic ACK Timing Adjusting Supported (Optimises Parameters Automatically in Telecommunications to Ensure Optimum Performance)
Management and Log NTP, SNMP, Syslog, Telnet
Web Page Configuration Management Support Web Page Configuration
Flexinble Bandwidth Choice 5/10/20/40MHz
General
HDMI Signal HDCP Compliant
Transport Protocol HDbitT
Supported Resolutions 480i (60Hz), 480p (60Hz), 576i (50Hz), 576p (50Hz), 720p (50Hz/60Hz), 1080i (50Hz/60Hz) and 1080p (24Hz/50Hz/60Hz)
IR Frequency Range 20kHz to 60kHz (Wideband)
Maximum Transmission Distance - Single Receiver Unit 200m (1080p/60Hz)
Maximum Transmission Distance - Two Receiver Units 120m (1080p/60Hz)
Maximum Transmission Distance - Three Receiver Units 70m (1080p/60Hz)
Operating Temperature -30°C to 70°C
Storage Temperature -40°C to 80°C
Operating Humidity 5% to 95% RH (Non-Condensing)
Power Supply 5V DC 3A
Power Consumption (Max.) 5.5W
Dimensions (W x D x H) 196mm x 138mm x 31mm
Weight 528g
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good

Enter the code in the box below:

Captcha