Music Hall MMF 9.3 Turntable - Black

Brand: Music Hall
Product Code: MUS-MMF-9.3-BLK
Warranty: 2 Years
$3,495.00
Qty:  
Music Hall
Truck
Free Shipping On Orders Over $75.00
Padlock
256-Bit SSL Secure Ordering System
Shield
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

MMF 9.3 Turntable

The music hall mmf-9.3 turntable is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by music hall.

Distinctive Design

The distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.

Our Penultimate Turntable

The mmf-9.3 comes in a high-gloss piano black lacquer finish and is available with or without a Goldring Eroica LX cartridge.


Key Features

  • Music hall’s unique triple plinth construction
  • One-piece full carbon fiber tonearm
  • Fully adjustable VTA, azimuth, and dampened arm lift mechanism
  • Counterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper
  • Completely isolated/decoupled DC motor with 33 1⁄3 and 45 rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridge
  • Motor sits on its own resonance damping puck
  • Optional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylus ($795 value)
  • The cartridge supplied is properly aligned and mounted
  • Inverted ceramic main bearing for super quiet, fluid operation
  • Non resonant, 1” thick acrylic platter
  • Soft felt platter mat
  • High quality gold RCA connectors and detachable phono cable
  • Adjustable tip toe feet with anti scratch cups
  • Low noise fully manual belt drive design
  • Built-in round spirit level for proper leveling
  • Dust cover and 45 rpm adaptor included
  • Excellent instruction manual and easy assembly
Specifications
Power Supply 15 V / 0-0.8 mA DC Universal Power Supply
Power Connection 100 – 240 Volt 50 or 60 Hz
Standby Power Consumption < 1 W
Speeds 33 1/3 rpm & 45 rpm Electronic Speed Change
Wow and Flutter ± 0.10%
Speed Deviation ± 0.06%
Rumble Max. > – 73 dB
Effective Tonearm Length 9" (230 mm)
Tonearm Weight 250 g (Without Counterweight)
Effective Arm Mass 8.5 g
Overhang 18 mm
Product Dimensions 18.25" (W) x 13.25" (D) x 7.25" (H) / 464 (W) x 330 (D) x 184 (H) mm
Weight 40 lbs (18.1 kg)
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good

Enter the code in the box below:

Captcha