SVS PB-2000 - 12" Ported Box Subwoofer - Black Ash

Brand: SVS
Product Code: PB2000-SUB-BLA
Warranty: 5 Years
In Stock
$1,590.00 $1,439.00
Qty:  
SVS
Truck
Free Shipping On Orders Over $75.00
Padlock
256-Bit SSL Secure Ordering System
Shield
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

PB-2000 Subwoofer

For chest-thumping movie slam and impact and sheer low frequency performance for the price, the PB-2000 subwoofer destroys larger and more expensive subwoofers, dipping all the way down to 17Hz without sacrificing musicality or speed in transients. The subwoofer features a front-firing 4-inch high-flow port with inner/outer port flares and energizes rooms of all sizes with extreme low frequency output for jaw-droppingly powerful and realistic movie and music audio experiences.

Commanding 12 Inch SVS High Output Driver

At the heart of the SVS PB-2000 ported box subwoofer is a newly engineered 12-inch 2000-series driver with dual high-grade ferrite magnets and FEA-optimized motor for nearly distortion-free performance. A reinforced Nomex spider was integrated for improved linearity and driver control, especially important when the STA-500D amp is pushing the subwoofers to their maximum output levels. To ensure the PB-2000 can withstand punishing output levels long into the future, the driver also features a durable low-creep rubber long-throw surround and integrated tinsel leads to maximize longevity.

Powerful and Sophisticated Sledge STA-500D Amplifier

The PB-2000 Subwoofer's Sledge STA-500D DSP amplifier features specs and features normally found in subwoofers costing two or three times as much. Conservatively rated at a robust 500 watts RMS continuous and 1,100+ watts peak dynamic, the amplifier has brains to match its brawn. A sophisticated DSP in the amplifier includes an array of filters and volume, gain, and phase controls for fine-tuning performance. The innovations don't stop there though. A frequency-dependent limiter/compressor algorithm with adjustable attack/release and compression parameters offers the ultimate in refined behavior at the drive limits of the subwoofer system.

With cabinet dimensions of 20.9" x 17.3" x 22" and weighing 66 lbs, the PB-2000 is nearly 40% larger and twice the weight of the SB-2000.


Frequency Response / Acoustic Data

  • 17-260 Hz +/- 3 dB
  • Expect 2-3 Hz deeper extension in small to mid-size rooms
  • 2-meter ground plane away from reflective structures (quasi-anechoic)

Subwoofer Specs

  • Premium black ash finish
  • Protective non-resonant steel mesh grille
  • Front-firing 12" driver
  • Rear-mounted amplifier
  • Screw-in rubber feet
  • Robust Medium Density Fibreboard (MDF) cabinet construction
  • Cabinet Dimensions: 20.9" (H) x 17.3" (W) x 23.2" (D) (without grille)
  • Overall Dimensions: 20.9" (H) x 17.3" (W) x 25.4" (D) (with grille)
  • Weight (unboxed): 65.6 pounds
  • Shipped Dimensions: 30" (H) x 23" (W) x 27" (D)
  • Shipped Weight: 82 pounds

Driver Specs

  • SVS 12" 2000-series driver
  • Powder-coated cast aluminum basket
  • Dual high-grade ferrite magnets
  • Finite Element Analysis (FEA)-optimized motor structure
  • Dual shorting rings reduce gap induction and lower distortion
  • Extended pole piece improves heat sink and thermal management properties
  • 2" diameter, high-power voice coil
  • Upgraded Nomex spider for improved linearity and driver control at extreme drive levels
  • High-quality insulated tinsel leads with 3-point-contact precision alignment
  • Lightweight aluminum cone with polypropylene dust cap provides excellent rigidity and pistonic behavior
  • Low-creep rubber long-throw surround for excellent durability and longevity

Amplifier Specs

  • Sledge STA-500D DSP amplifier
  • 500 watts RMS continuous (1100 watts peak dynamic)
  • Efficient and cool-running Class D topology
  • DSP control for accurate response and refined behaviour under all operating conditions
  • Main power rocker switch
  • Auto-On / On toggle switch
  • 3-12V trigger with 1/8" (3.5 mm) TRS mini-jack input
  • Green standby mode with > 0.5 watts consumption
  • Stereo line-level RCA Input & Output connections
  • Input impedance – 47 kΩ (unbalanced line-level RCA)
  • Continuously variable volume/gain control
  • Continuously variable (0-180 degrees) phase control
  • Continuously variable (50-160 Hz) 12 dB/octave low pass filter frequency with disable/LFE setting
  • Fixed 80 Hz 12 dB/octave high pass filter on line level outputs
  • RoHS compliant, lead-free construction and world-wide safety certifications
  • Detachable power cord
Specifications
Amplifier 500 Watts RMS (1100 Watts Peak)
Driver 12"
Frequency Response 17-260 Hz ± 3 dB
Port Size Single 4"
Height 530mm
Width 440mm
Depth 645mm
Weight 29.75kg
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good

Enter the code in the box below:

Captcha