Monster Performance in a Compact Enclosure!
The Earthquake Sound MiniMe P10 version 2 subwoofer uses advanced class D circuitry with over 90% efficiency, allowing it to continuously perform without getting hot.
Earthquake's own patented SLAPS (Symmetrically Loaded Audio Passive System) passive radiator technology dramatically increases the subwoofer's efficiency and capability for ultra low frequency reproduction. The unique design of the SLAPS employs dual identical suspensions, allowing the passive driver to move the same amount of air in either direction. Coupled with the active driver, the SLAPS enables the sub to deliver louder bass without using more power from the amplifier.
The deep, luxurious black piano lacquer on the cabinet begins with a thorough sanding and priming, followed by multiple applications of the lacquer, fine sanding between each layer, and finishing with a smooth, high gloss clear coat.
The MiniMe sports a two driver (one active and one passive) system. The active driver incorporates a poly injection cone body and a dual layer aluminium bobbin voice coil that ensures linear travel as it handles the straight up power delivered by the digital amplifier. Working together with the active driver, the patented SLAPS passive radiator is tuned to deliver the incredible bass output demanded by today's savvy consumers and most critical audiophiles.
The MiniMe system is designed to dramatically enhance your enjoyment of music and films at home by adding power and impact to low frequency sound effects without taking up your entire living space.
The MiniMe subwoofer utilises an advanced digital class D amplifier, a premium long throw driver and a mass tuned passive radiator with SLAPS technology. With a ported design and piano gloss enclosure, the MiniMe P10V2 subwoofer delivers phenomenal bass.
- Built in 600 watt high efficiency digital amplifier
- 10 inch long throw premium quality drivers
- 10 inch mass tuned SLAPS patented passive radiator technology unit
- Signal sensing circuitry
- IR input with IR remote and remote eye
- Operation status LED's
- RCA and high level inputs
- Room tuning adjustments
- 40Hz - 160Hz frequency adjustment
- 0 - 180° phase switch
- SUB/LFE operation switch
- Black high gloss piano lacquer finish
- 110/220V selector switch
SLAPS (Symmetrically Loaded Audio Passive System) Diagram
|Driver||10" High Excursion Earthquake Subwoofer|
|Passive Radiator||10″ Patented SLAPS|
|Amplifier Power||600W (Class D)|
|Frequency Response||20Hz - 135Hz|
|Dimensions (W x D x H)||289mm x 340mm x 311mm|
Write a ReviewYour Name:
Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
Enter the code in the box below: