The Silver 200’s sleek appearance makes it a truly compact and attractive floorstander, blending audiophile performance with lifestyle proportions.
A pair of Monitor Audio’s unique 5¼-inch C-CAM RST bass drivers share the duties of delivering bass and mid/bass. Configured as a two-and-a-half way system both electrically and acoustically, you will be amazed at the magical sound quality that this slimline can produce in your home.
The two bass drivers operate in separate acoustic chambers within the enclosure to provide differential tuning and are divided optimally with crossovers to ensure both bass drivers contribute to the lower frequencies. This ensures only the mid-range crosses over with the tweeter and results in a consistent and precise image, on and off axis. This configuration delivers performance approaching a three-way design whilst ensuring higher efficiency and extended low frequency, yet in a smaller cabinet.
The drive units are constructed with massive magnetic systems capable of deep bass extension. The low-frequency response has been engineered to provide smooth roll-off without exhibiting any of the usual ‘overhang’, meaning that the Silver 200 can be sited close to a wall and provide the ideal blend of domesticity and blazing performance. Diminutive for a floorstander, this model is no slouch. The Silver 200 is a serious audiophile speaker with amazing drive and incredible musicality. The engineering challenge was to create a smaller box with bigger sound; with the Silver 200, Monitor Audio achieves that goal so that you can enjoy your music and films with convincing realism.
- Two-and-a-half-way, three-driver configuration
- Differentially-tuned acoustic system means high efficiency with powerful low-frequency extension
- 25 mm C-CAM (Ceramic-Coated Aluminium/Magnesium) tweeter featuring vented Neo magnet system optimised for lower distortion and cleaner sounding highs
- 5¼-inch bass and 5¼-inch bass/mid drivers with ‘dished’ C-CAM cone profile for better damping and improved mid-range clarity
- RST Cone profile for improved diaphragm rigidity and lower distortion
|System Format||2 1/2 Way|
|Frequency Response||38 Hz — 35 kHz|
|Sensitivity (1W@1M)||89 dB|
|Nominal Impedance||8 Ohms|
|Minimum Impedance||4.7 ohms @ 182 Hz|
|Maximum SPL||114 dBA (Pair)|
|Power Handling (RMS)||150 W|
|Recommended Amplifier Requirements||60 — 150 W|
|Bass Alignment||Dual Chamber Bass Reflex with Differential Tuning. Twin HiVe II Port System.|
|Crossover Frequency||LF: 700 Hz, MF/HF: 2.9 kHz|
|Drive Unit||1 x 5 1/4" C-CAM RST Bass Driver, 1 x 5 1/4" C-CAM RST Bass/Mid Driver, 1 x 1" (25 mm) C-CAM Gold Dome Tweeter|
|Cabinet Dimensions (Excluding Grille and Terminals (H x W x D))||885 x 165 x 240 mm (34 13/16 x 6 1/2 x 9 7/16")|
|External Dimensions (Including Grille and Terminals (H x W x D))||885 x 165 x 269 mm (34 13/16 x 6 1/2 x 10 9/16")|
|External Dimensions (Including Out-Rigger Plates, Feet and Spikes (H x W x D))||918 x 232 x 307 mm (36 1/8 x 9 1/8 x 12 1/16")|
|Weight (Each)||14.6 kg (32 lb 3 oz)|
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.Your Name:
Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
Enter the code in the box below: