Audioengine HD3 Wireless Powered Speakers (Pair)

Brand: Audioengine
Product Code: AUE-HD3
Warranty: 3 Years
Colour: *

$529.00
Qty:  
Audioengine
Truck
Free Shipping On Orders Over $75.00
Padlock
256-Bit SSL Secure Ordering System
Shield
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

HD3 Wireless Speaker System

Premium Bluetooth speakers that work with all your devices and apps. No network setup, passwords to enter, or buttons to push.


Every App, Every Device

Wireless That Really Works

Our most-versatile wireless Bluetooth speakers. HD3 Wireless Speakers work with all your apps, music, and devices so no matter how you listen, HD3 has you covered. The ultimate mini music system with wireless that works.

Tidal, Spotify, Pandora…all your favourite streaming apps play instantly.

Audioengine HD3

Why You'll Love Them

Benefits

  • Small speakers with a big sound that fills any room
  • Premium Bluetooth wireless that works with all your devices and apps
  • High-end sound wrapped in hand-built wood cabinets
  • Simple setup, no receiver needed
  • No network setup, no passwords, no hassle
  • No buttons to push & inputs are always ready to go
  • Front panel volume control and headphone jack
Audioengine HD3

Set Up In Seconds

Simple. No Hassle. Easy to Use.

The HD3 Wireless Speakers are small desktop speakers with a surprisingly large sound for their size.

No network setup, passwords to enter, or buttons to push. Setting up these speakers is so easy you’ll be rocking in no time.

Keep your music fun, easy, and sounding great.

Audioengine HD3

Small Speakers, Big Sound

Surprisingly Loud

Don’t let their size fool you as this little speaker is packed with much more sound than you would expect.

The HD3 Wireless Speakers are constructed with custom Audioengine components: aramid fibre woofers, silk tweeters, Premium Bluetooth aptX-HD, and built-in power amps wrapped in precision-tuned, hand-crafted cabinets.

Clear, full and powerful audio that fills almost any room.

Audioengine HD3

Go Old School

Analogue Baby!

Audioengine wireless speakers are special. Their built-in analogue power amplifiers sound incredible compared to lower-cost digital amps found in other mass-produced brands.

A whole new audio experience, guaranteed.

Audioengine HD3

Custom Components

Audioengine designs and manufactures their own speaker drivers and other critical components. In other words, the HD3 is not a box-built system with off-the-shelf parts, but includes custom-designed components constructed to their specifications. What they do not fabricate directly inside their factories they have made to their specific designs. Parts such as circuit boards, transformers, magnets, and wiring harnesses, for example.

Efficient Integrated Design

The speaker cabinets, drivers, innovative bass port designs, amplifiers, and passive crossovers are all critically tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components. We build all this goodness into the left speaker cabinet to make it super-easy to connect your smartphone, tablet, computer, TV, network player or any other audio product.

Built-in B1 and D1

Audioengine have taken features from two of their best-selling products, the B1 Bluetooth Receiver and the D1 24-bit DAC, and combined some of this circuitry with advanced speaker components to achieve a complete high-end analogue and digital audio system.

High Quality Bluetooth Audio

The Bluetooth built into the HD3 powered speakers features aptX HD coding which is an advanced Bluetooth audio codec with very impressive sound. And even if your phone or tablet does not have aptX HD, the HD3 Bluetooth solution is backwards-compatible with SBC and AAC codecs, as well as standard aptX, so you can wirelessly stream music from any Bluetooth-enabled device and still enjoy all your music. High-fidelity Bluetooth aptX HD that really works and sounds great. Here is why:

Extended Wireless Range

Most Bluetooth implementations have very limited range, typically within just one room. But with careful signal management circuitry and antenna tuning, we offer a superior solution that has up to 3 times the range of standard Bluetooth for multi-room use, with no degradation in audio quality.

24-Bit DAC

The HD3 Bluetooth receiver and USB input both utilise the PCM 5102 DAC, widely known for its low-noise and high-fidelity. The PCM 5102 is used as an upsampling DAC and will pad all bit depths to 24-bits, achieving a higher signal-to-noise ratio and lower noise floor. Due to the high signal-to-noise specs of the PCM 5102, the fact that digital signal is upsampled to 24-bits as well as the added benefit of onboard triple redundancy power source conversion and filtering the HD3 Bluetooth implementation presents impressive low noise and low distortion characteristics with a noticeable improvement over other Bluetooth devices.

HD3 Headphone Amplifier

The HD3 contains a high-performance headphone amplifier based on the OPA2134 low-noise opamp. This amp is able to provide low-impedance, high-fidelity audio and a 2-volt output which easily drives a wide range of headphones.

Amplifier Design

The amplifiers in powered Audioengine speakers are located in the left speaker and are a conservatively-rated class A/B analogue monoblock design. This is a more traditional speaker/amplifier configuration which provides excellent quality audio and greater flexibility. All circuit boards for the power and preamp sections are vertically mounted for maximum mechanical shock protection.

Driver Designs

Audioengine uses audiophile-quality, ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters hold up well under high power and the edge-driven design gives very smooth response. The woofers are aramid fibre woven glass composite with rubber surrounds. Aramid fibre is obviously very strong, which means the woofer retains its shape when being driven at high levels.

Furniture Grade Finishes

The HD3 cabinets are available in several handsome finishes, including walnut and cherry veneers as well as satin black paint, offering a wide choice for complementing room furnishings. Also included are detachable grills that add further aesthetic advantages as they are firmly held in place with hidden neodymium magnets for a clean look.

Shielding

Each of the HD3’s speaker drivers are directly magnetically-shielded.


Key Features

  • 2 speaker Stereo
  • Advanced Bluetooth wireless
  • USB audio input
  • Dual analogue audio inputs
  • Subwoofer output
General Specifications
Type 2.0 powered multimedia speaker system
Amplifier type Dual analogue class A/B monolithic
Power output 60 W peak power total (15 W RMS / 30 W peak per channel), AES
Drivers 2.75" aramid fiber woofers, 3/4" silk dome tweeters
Inputs 3.5 mm stereo mini-jack, stereo RCA, USB, Bluetooth
Outputs RCA variable line-out, 3.5 mm mini-jack headphone out
Mains voltages 110 - 240 V 50/60 Hz auto-switching
SNR >95 dB (typical A-weighted)
THD+N <0.05% at all power settings
Crosstalk <50 dB
Frequency response 65 Hz - 22 kHz +/-2.0 dB
Frequency response with bass reduction switch selected 100 Hz - 22 kHz +/-2.0 dB (-5 dB down)
Input impedance 5K ohms unbalanced
Protection Output current limiting, thermal over-temperature, power on/off transient protection
Headphone Amp Specifications
Headphone amp type OPA2134
Full-scale headphone output level 2.0 V RMS
Output impedance 2 ohms
Recommended headphone impedance range 10 ohms to 10K ohms
Bluetooth Specifications
Internal D/A converter PCM 5102
Input bit depth 24-bits, upsampled
Bluetooth receiver type Bluetooth 5.0 audio
Supported codecs aptX HD, aptX low latency, aptX, AAC, SBC
Wireless operation range Up to 100 ft (30 m) typical
Input data rate Determined by Bluetooth
Wireless latency ~30 milliseconds (ms)
USB Specifications
Connector type Micro-USB
USB device class USB 1.1 or above
Internal D/A converter PCM 5102
Input bit depth 24-bits, upsampled
Input data rate 44.1 kHz/48 kHz
Weight & Measurements
Dimensions (each) - H x W x D 17.8 cm x 10.9 cm x 14 cm / 7" x 4.25" x 5.5"
Weight (left speaker) 1.8 kg / 4 lbs
Weight (right speaker) 1.5 kg / 3.4 lbs
Shipping weight 4.5 kg / 10 lbs
Shipping box dimensions - H x L x W 29.5 cm x 30 cm x 22.5 cm / 11.6" x 11.75" x 8.8"
Materials & Construction
Cabinet 18 mm thick MDF cabinets with real wood veneer
Tweeters 3/4" (20 mm) silk dome tweeters with neodymium magnets
Woofers 2.75" aramid fibre woofers with advanced voice coils
Finish options Satin black, gloss white, cherry and walnut
Environmental Requirements
Operating temperature 32 degrees F to 95 degrees F
Non-operating temperature -4 degrees F to 113 degrees F
Relative humidity 5% to 95% non-condensing
Audioengine HD3
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good

Enter the code in the box below:

Captcha