A Quality LAN Tester & Multimeter Combined in a Single Convenient Unit!
The 2 in 1 LAN tester and multimeter is an innovative product that allows the user to easily measure DC/AC voltage/current, resistance, diode and verify the cable continuity, open/short and cross connect etc.
The included remote terminator allows the user to test installed cable either at a wall jack or a patch panel adding value and convenience. Proper use and care of this meter will provide years of reliable service.
Key Features
- Measures DC/AC voltage, DC/AC current, resistance, continuity, diode forward voltage and LAN cable
- 3-1/2 digit (2000 count) LCD display for multimeter functions
- LED displays actual pin configuration of 10BASE-T, 10BASE-02 Thin Ethernet, FJ45/RJ11, 258A, TIA-568a/568b and token ring cables
- Double molded housing
- CAT111 600V / CAT11 1000V
- Provides easy to read continuity and fault status display
- Checks for continuity, open wire, grounded wire, shorted pair and crossed pair faults
- Allows for remote testing of installed cables from wall jack or patch panel
- Auto or manual scanning for LAN tester
- Autoranging with auto power off for multimeter functions
Package Contents
- 1 x Doss DM1000 modular cable tester
- 1 x LAN test remote terminator
- 1 x set of test leads
- 3 x RJ11/12 inserts
- 1 x BNC plug to plug adapter
- 1 x RJ45 plug to plug short lead
- 2 x RJ45 plug to BNC socket short leads
- 2 x AAA aatteries
- 1 x 9V battery
- 1 x Carry case
- 1 x User manual
There are currently no reviews available for this product. Be the first to write a review!
Write a Review
Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.
Your Name:Your Review: Note: Plain text only (HTML is not translated).
Rating: Bad Good
Enter the code in the box below:
