AC Infinity CONTROLLER 1 - Thermal Trigger for USB Fans & Devices

Brand: AC Infinity
Product Code: ACI-PCA1
Warranty: 2 Years
$59.00
Qty:  
AC Infinity
Truck
Free Shipping On Orders Over $99
Padlock
256-Bit SSL Secure Ordering System
Shield
Australian Warranty On All Products
Please enter your post code to obtain a shipping estimate for this product.
Post Code:
Store Categories

AC Infinity CONTROLLER 1

The CONTROLLER 1 is designed to provide temperature trigger functionality to USB fans and devices, including AC Infinity AIRPLATE Series cabinet fans and MULTIFAN Series component fans. The unit measures 3.2 by 1.4 by 0.5 inches. It features an aluminium back-plate which can be surface mounted onto wall panels and cabinets. Includes a 6-foot precision thermal probe that is water resistant. Complete kit includes thermal trigger unit, thermal probe, mounting screws, and instruction manual.


Key Features

  • Preset temperature trigger with corded thermal probe, for USB fans and devices
  • Also controls up to six AC Infinity Cabinet and USB Fans, see below for compatibility
  • Programming includes four pre-set temperature triggers as well as an ON and OFF mode
  • Features a surface mount design, with a 6-ft precision waterproof temperature probe
  • Can be powered by USB or Outlet (USB wall adapter not included)

Programming

The controller features four pre-set temperature triggers as well as an ON and OFF mode. The four temperature triggers are 84°F, 88°F, 92°F, and 96°F. Also includes a 4°F buffer to prevent fans from turning on and off too quickly due to small fluctuations in temperature.

Compatibility

The CONTROLLER 1 can power up to 10 watts worth of USB devices and fans, including AC Infinity AIRPLATE and MULTIFAN Series fans. This is approximately six fans but please note that some models contains more than one fan. For example, dual fan systems such as the AIRPLATE S7 or MULTIFAN S5 contains two fans. The controller would only be able to power up to three of these models for a total of six fans. The controller can also utilize the USB wall adapter that is included with AIRPLATE S-series fans to be powered through an outlet.

Product and Mounting Dimensions
Total Dimensions 8.3 x 3.6 x 1.3 cm (3.25 x 1.4 x 0.5 in.)
Backplate Dimensions 8.3 x 3.6 cm (3.25 x 1.4 in.)
Hole to Hole Distance 7.3 cm (2.87 in.)
Screw Hole Size Ø 0.3 cm (Ø 0.119 in.)
Cord Length 183 cm (6 Feet)
Thermal Probe Length 183 cm (6 Feet)
Product Performance and Technical Specs
Maximum Fans Controlled 6
Max Power Supported 10 W
Programming Temperatures 32 to 140°F
Operating Voltage 5 V DC
Power 10 W
Current 2 A
USB Outlet Input 5 V DC
Operating Humidity 35 to 85% RH
There are currently no reviews available for this product. Be the first to write a review!

Write a Review

Note: If reviewing a product that has variations such as colour or length, please include this information at the start of the review. For example "Colour: Red" or "Cable Length: 2m" etc.

Your Name:


Your Review: Note: Plain text only (HTML is not translated).

Rating: Bad           Good